Description

Sound absorption material, which due to its latex impregnation has a high sound absorption quality over a wide frequency range. Elasticity of the product improves its exploitation characteristics and allows to easily apply it to complex surfaces.

Composition

Formed bitumen saturated polyurethane foam.

Properties

The material has very good flexibility what allows to use it on different surfaces while providing high vibration damping properties and heat insulation.

Application

Use for installation on doors, roof and interior panels of the car.
The material is installed at dry clean painted metal surface. Temperature in workroom must be from +18 to +30°С. Material is released from protective tint and is pressed carefully to work surface. Care should be taken to avoid air chambers in the material, which admit moisture and reduce insulation properties. Do not install material on the dirty and on the corroded metal surface.

Storage

Products stored in a room at a temperature no higher than +40°C in the horizontal position on a flat surface at a distance of not less than 1 meter from the heating system in the conditions excluding moisture, oils and direct sunlight, stacked no more than 1 meter in height.